Calibration Laboratory

Calibration of Volumetric Apparatuses

If you are in need of an accredited method for calibration of pipettes (compliant with the ISO 8655 standard), preventive maintenance, repairs with the use of original spare parts or just a routine check-up, you can count on our experience, supported by certificates of training.

Here you can fill out a form for your pipettes (repair/calibration).

Kemomed’s calibration laboratory is accredited at the Slovenian Accreditation, reg. number LK-022, SIST EN ISO/IEC 17025.

SIST EN ISO/IEC 17025 (paragraph 5.10.4.3) states: When and if the instrument for calibration is calibrated and repaired, a report must be filled out showing the results before and after the calibration, if these results are available.

We provide traceability of calibration, meaning that we do a pre-calibration or calibration before the repair. We offer services like:

  • Calibration of pipettes (electronic, mechanic, adjustable, fixed, single or multi channel)

  • Calibration of dispensers

  • Calibration of burettes and dispensettes

  • Servicing

Calibration – Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication.

Servicing

We collaborate with the international franchise PipetteDoctor that not only supplies us with spare parts, but also provides specialised technical training. We offer servicing and spare parts availability for the following manufacturers: Biohit, Brand, CAPP, Corning, Eppendorf, Thermo (Finnpipette), Gilson, Rainin, and Socorex.

If possible, we tend to pick up and deliver the pipettes personally.  We guarantee the shortest possible response time from your call to the end of our repairs.

Maintenance

Along with every calibration of pipettes we also perform its maintenance – disinfection, cleaning of the inner and outer parts, lubrication, changing the filters and seals.

Certificate

 

Contact us for more information:

Head of quality assurance and calibration laboratory:

Urša Medved: u.medved(at)kemomed.si

Tea Vidic, Breda Arhar, Sandra Zajkoska: laboratorij(at)kemomed.si

Rok Sinobad: r.sinobad(at)kemomed.si

Do you need advice
from an expert
Fill out the question
Fill out the name
Fill out the contact